The high quality argon gas feed hose from Huntingdon Fusion Techniques HFT® provides welders with a method of delivering non-contaminated argon gas into their welding zone. The company produces tailor made Inert Gas Feed Hoses, suitable for use for TIG welding where argon and other inert gas is used.
Georgia Gascoyne, CEO for HFT® said: “Our high quality Argon Gas Feed Hose is manufactured of a special low outgassing rate rubber feed hose, which comes complete with a regulator and can directly connect to any range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other. Designed to help keep welding zones purged of oxygen.”
Conforming to British Standard BS EWN 599 Quality Standard, the Inert Gas Feed Hoses each have a temperature range from -30° up to 80°C and a safety factor of three times working pressure 20 bar (300 psi).
A selection of leak tight adaptors is provided for attaching the inert gas regulator whilst the pre-fitted other end joins up with all HFT® Argweld® Pipe Weld Purging Systems. All of these high quality fittings will eliminate welding connection difficulties that welders might experience on site.
The Inert Gas Feed Hoses can also be supplied to all other TIG / GTAW welders as well as laser operators with their own special fittings as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m, with special made hoses made to order.
Courtesy of Huntingdon Fusion Techniques HFT®.